Bad justification for attribute values when using symbol builder

[nicolas-v]

Hi all, I'm new on the forums and this is my first message.

I currently have a problem when I create a custom symbol and set text justify of pin attribute text to "middle right".

It seems that all attribute name and pin values which last character is "1" have a bad justification.

The problem can be seen in the attached example for attributes TERM05, 06, 07, 08, 11, and 01 (text justify is set to "middle right").

When inserting the block using icon menu, the problem happens.

Does anyone already have had this kind of problem? 

[jseefdrumr]

I tried it here and it worked fine. I even inserted it in two different drawings, that used different fonts, and they were both OK.

What happens if you change the font? Which may not be allowable, so ....

What happens if you change its width factor to 1? Some TTF fonts don't like to be squished.

Or, what happens if you populate that attribute with a value other than its default - does it align properly then?

[Thomas.CoxTFXY8]

If you insert your custom block into a new drawing what happens ?