Community
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
<Matt..
href="mailto:mike.barkasi@bentley.com">mike.barkasi@bentley.com> wrote
in message
href="news:6175832@discussion.autodesk.com">news:6175832@discussion.autodesk.com...
While I am not so familiar with C3d rendering.. It is my experience with
Microstation to use a cylinder or what we call an environmental map. If using
a cylinder there is the potential for the image to show a seam area unless the
sky image has been prepared to match at the ends. In such a case you can
rotate the cylinder to avoid the seam when setting up the view perspective (Do
you have view perspective?) Attached is a civil example prepared using
Microstation, Approximate rendering time was < 2 hrs. Mike Barkasi Bentley
Civil
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
"MapleWalnutIceCream" wrote in messageI've
href="news:6176317@discussion.autodesk.com">news:6176317@discussion.autodesk.com...
been playing in my "free time" with one of our jobs. Sure is fun.
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px"
dir=ltr>
"Mark Spatz"; "P.E." <
href="mailto:mspatz@hrg-inc.com">mspatz@hrg-inc.com> wrote in message
href="news:6176491@discussion.autodesk.com">news:6176491@discussion.autodesk.com...
I would think adding the Smoothing edit to the
surface definition would help making things more
smooth.
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Allen Jessup
CAD Manager - Designer
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Can't find what you're looking for? Ask the community or share your knowledge.