UCS appears next to an object every time I select it. How do I remove it?

[Anonymous]

I was trying to get the navcube back onto my screen and must have hit a button so that the ucs appears every time I select an object.  I am hoping for instructions on how to remove it?  Thank you.

[MarySeufert · Accepted solution]

From your description I think it is actually the 3D move Gizmo that is in the way. Set DEFAULTGIZMO to 3.

From help: DEFAULTGIZMO

 

Type:	Integer
Saved in:	Not-save
Initial value:	0

Sets the 3D Move, 3D Rotate, or 3D Scale gizmo as the default during subobject selection.

0	The 3D Move gizmo is displayed by default when an object is selected in a 3D visual style.
1	The 3D Rotate gizmo is displayed by default when an object is selected in a 3D visual style.
2	The 3D Scale gizmo is displayed by default when an object is selected in a 3D visual style.
3	No gizmo is displayed by default when an object is selected in a 3D visual style.

[Anonymous]

Thank you so much!  That's exactly what it was.

[npettyRW9D4]

THANK YOU LOL.  It's been bugging me for a few days and then I couldn't remember if it was always there or not... But I knew it couldn't be so, I'd remember it bothering me this much.

[Anonymous]

I went to the view ribbon in AutoCAD 2014 and in the visual styles section selected "2D wireframe" in the drop-down menu and it worked. 

[Anonymous]

hi i have same problem for him but i don't understand how to solve it
can you tell me the steeps again and if u can with photos please

---

@MarySeufert wrote:

From your description I think it is actually the 3D move Gizmo that is in the way. Set DEFAULTGIZMO to 3.

From help: DEFAULTGIZMO

 

Type:	Integer
Saved in:	Not-save
Initial value:	0

Sets the 3D Move, 3D Rotate, or 3D Scale gizmo as the default during subobject selection.

hi acutaly i have same problem but i dont understand how can i solve it 
please can you tell me again step by step and if you can with photos it will be nice from you  

[MarySeufert]

Enter DEFAULTGIZMO at the command line.  Enter the numerical value you want.

This will change the value of the system variable that controls the appearance of the Gizmo.

[Anonymous]

---

@MarySeufert wrote:

Enter DEFAULTGIZMO at the command line.  Enter the numerical value you want.

This will change the value of the system variable that controls the appearance of the Gizmo.

---

i try what you tell my not work  please help me what i have to do exactly

---

@MarySeufert wrote:

Enter DEFAULTGIZMO at the command line.  Enter the numerical value you want.

This will change the value of the system variable that controls the appearance of the Gizmo.

---

to remove this ucs after each selection appear

[Anonymous]

no gizmo же

[Mohamedhamdyacc0]

choose view from ribbon and then go to visual styles (change visual style to 2D wireframe)