Truss
Accepted solution
Hi
This kind of truss is out of the pattern of AAS because there are diagonals with different angles and different lenghts...
In my opinion you shoud try to model this truss saving a poliline in AutoCAD and everytime you need to model it...use de copy/paste tool and finnaly use the tool in AAS called "profile in a line"
I hope that helps...
- Marque "Aceitar como Solução", caso tenha resolvido seu problema.
- Select "Accept as Solution", if it has soplved the problem.
- Clique em "Curtir" se a resposta ajudou.
- Click on "like" if the answer helped.
Antonio Dias
|Linkedin|Instagram|Facebook|Twitter|YouTube|
Colaborador da Comunidade de Usuários Autodesk Brasil
Accepted solution
Beam from line tool, on ribbon , home tab, objects panel, just to the left of the main beam creation button.
Draw lines to create the truss outline, then use "beam from line".
Beams created , change sizes and properties as required.
Draw lines to create the truss outline, then use "beam from line".
Beams created , change sizes and properties as required.
John Bennett
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
