Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
How to change imperial scale to metric scale in AS
if you use the international ADVS version, there should be an optioin at start, that you can set ot be shown in the management tools, that allows you to switch between EN (metric) and US(imperial) version. Otherwise there are both settings in the management tools and in the start/settings/ project settings tab to define the units that you want to use.
HTH,
Christian Blei CBT Christian Blei Tools christianblei.de youtube.com/channel/UCxjA_NbeScQy9C0Z1xjwXpw
if you use the international ADVS version, there should be an optioin at start, that you can set ot be shown in the management tools, that allows you to switch between EN (metric) and US(imperial) version. Otherwise there are both settings in the management tools and in the start/settings/ project settings tab to define the units that you want to use.
HTH,
Christian Blei CBT Christian Blei Tools christianblei.de youtube.com/channel/UCxjA_NbeScQy9C0Z1xjwXpw
