Assembly position number

[S.MANICKAVASAGAM]

Dear expert,

               How to get only assembly position number in assembly with parts drawing title block?

           Here, single part mark not required.

  

[Sebastian_Eiche · Accepted solution]

As I know for this you need the token "mainpartnumber" and this is a not available token according to the AKN:
https://knowledge.autodesk.com/support/advance-steel/learn-explore/caas/CloudHelp/cloudhelp/2019/ENU...

But I would use this:

• copy the original structured list (which will show all mainpart on the prototype)
• select the all fields which is not need--so only the MP Name of the Groupheader (I attach an example)
• Place this list on the prototype at the place you want

Example:

[S.MANICKAVASAGAM]

Dear expert,

                Thanks. your attached drawing not open. I think version issue. please can you save as 2019 version and send.?

[Sebastian_Eiche]

No I could not, because a "save as" is not possible in Advance Steel. 
But I  wrote you all steps which are needed, you only had to open your templates and delete all fields only the MP field of the groupheade1 should be in the template. 
These are easy steps...I think you will go for it alone

[S.MANICKAVASAGAM]

Dear expert,

                  Thanks lot. i got result. but, how to remove the around box in text.

[Sebastian_Eiche]

If you deactivate it in the template and recreate the list, they should be dissapear.

[Sebastian_Eiche]

I would also move the field to UCS 0,0,0 so it could be placed a bit easier

[S.MANICKAVASAGAM]

Dear expert,

                 How to deactivate it in the template?

[Sebastian_Eiche · Accepted solution]

you show the screenshot with the border, this is the deactivation!

And if you do this, and recreate the list on the detail, there should be no lines. 
But maybe this is a problem of the Version 2019?
Then select the field open the AutoCAD properties and select a linetype like "dotted" and change the linescale, so you only have 4 points