Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Could somebody explain me a reason that it is not possible to manually label anchors and studs.
Yes... I know that it could be done via "Drawing Styles", but sometimes I need to manually label few anchors or studs and it can't be done on the drawing.
I can label bolts and holes but can't do it for anchors and studs!
Do the following steps. I don't know why there is no specific row for anchors but when you add the anchor name token in place in screenshot below it works fine.
In MT, filter 'Token', uncheck 'Take from model only required tokens'.
=> Update defaults
Regards.
@acbdesign - checked it twice (checked and unchecked)... and it is not working in Polish language AS installation.
In English version it is working without any problems, but unfortunately - for some reasons - I had to work in Polish version of AS.
@produkcja- after "Menadżer zawartości etykiet" ("Label content manager"), a message is displayed: "Wszystkie odsyłacze już istnieją w detalu" ("All tokens already exist in detail").
1. In English version of AS - always worked without any problems.
2. In Polish version of AS - it is working only if label is changed by @produkcja procedure. Important was to set active "User settings" (latest picture).
Anyway... I have no idea why it is so complicated in Polish version, because in English version there are no problems with labelling anchors, studs or special parts !?
