Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Max 2014, move gizmo locked to center box handle when snaps toggle selected.
Max 2014, move gizmo locked to center box handle when snaps toggle selected.
Any thoughts? The move handles can be selected independently but when the snaps toggle is on the selection is locked to the center box handle. Rotate and scale gizmos are uneffected.
Works fine here - snaps should not affect whether the Gizmo handles are selectable or not. Try grabbing the handle first then toggling Snaps on. You might get problems if the Gizmo is too small - try making it a bit bigger ("+" key next to Backspace).
When I toggle on and off the snaps, the gizmo handle selection toggles between the previously selected handle to the center box handle. Unselect snaps and the handle selection returns to the preivious handle. Resized Gizmo with no effect on problem. The problem presists in all files, after program restart and computer restart. Service pack 3 installed. Is this an issue for techsupport?
Possibly - could you create a small scene which shows the problem, zip and attach it to a reply. If it works normally here then it's likely a settings issue - possibly corrupted .ini files - on your system.
Well spotted. I never turn them off because you can override them with that little Preferences option (grabbing the circle overrides the constraints) so there's no need to actually turn them off. Plus I have the Axis Constraints toolbar visible - last button on there is the same function as the one you described (and quicker to access 😉 ).
