Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Even an arbitrary "Sensitivity" setting would be helpful if "Angle" is problematic. Anything to allow a little fine tuning to this setting would be a welcome addition.
A more complicated 2nd or 3rd version implementation could be a "%", similar to this:
0.00=full segmentation (as per "Steps"), thus "Steps" also becomes a segmentation cap for higher settings.
0.00-.99=perfectly straight segments only are progressively optimized, ie. corner <-> corner vertex segments.
1.00 = all straight segments are fully optimized, curved segments are unaffected
1.01 - 99.99 = Curved segments are progressively refined based on the curvature
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")