Urgent Routine. Section 3D solids lisp

[alejandromartinmate]

Hi all,

I really need, if is possoble, a routine to make sections to a solid every "x" distance. For example, to selec a solid and a get the sections( paralell cros sections) every 1 meter following a straight line. That would be very helpfull.

 And wolud even better to have the posiblility to get the sections (radial cross sections) follwing and arc, every 1 meter ( arclenght= 1m) or following a polyline.

Thank you very much in advance to all of you how are able to do this kind of routines...amecing!!!

Best regards,

Alejandro Martin

[devitg]

Alejandro, please upload your dwg and , please, explain what do you mean about, or send it offline . See attached file And would even better to have the possibility to get the sections (radial cross sections) following and arc, every 1 meter ( arclenght= 1m) or following a polyline. Hablo español.

[trevor.bird.au · Accepted solution]

Hi Alejandro,

Please try the attached program, its a VLX but I had to ZIP it to upload it.

The section REGIONS created from the solid are put onto layer "SectionSolidsPath_Sections".

The XYZ axes option inserts a block representing the X, Y and Z axes calculated at each point along the path where a section has been successfully taken.

I use it for testing purposes but its interesting to see.
The XYZ axes block is put onto layer "SectionSolidsPath_Axes".

Command: SECTIONSOLIDSPATH
Select path object (ARC,LINE,POLYLINE,SPLINE):
Select solids to section:
Length of path: 1000.0 Section distance (0 to cancel): <100.0>
Show section XYZ axes on path? <No>

I hope this helps.

Regards,
Trevor

[alejandromartinmate · Accepted solution]

Your routine is perfect!!!

Thanks a lot, I really apreciate it.

Best Regards