Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Duct text not lining up with duct that is not exactly north/south or east/west
Duct text not lining up with duct that is not exactly north/south or east/west
If I have a duct that runs at a perfect 0,90,180,270 the duct tag works perfect but if the duct runs at an angle like 45 deg, the text stays perfectly horizontal and does not line up with the duct.
Open the Tag Family for editing. Once open, there is a single checkbox option under Properties (with no elements selected) named "Rotate with component". Toggle that and load the Tag back into the Project.
Corey D. ────────────────────────────────────────────────────────────────────── ⁞|⁞ Please use .Accept as Solution and Give Kudos as appropriate to further enhance these forums. Thank you!