I placed a wall below the staircase how to attach the wall to the slating side of the stairs. How to join the stairs to the floor slab so that it reads as a one structure?
Solved! Go to Solution.
Solved by constantin.stroescu. Go to Solution.
Solved by LisaDrago. Go to Solution.
2. In order to make a seamless conection betewen the floor slab and the stair structure:
Constantin Stroescu
Welcome to the Discussion!
Another option I would like to throw into the mix - Modify the wall profile.
You will need to do this is a section view of the wall - Select the wall in the section and in the Ribbon you will see the Edit Profile tool - select it. See Image edit profile.
Then you can modify the boundary of the wall to follow the stair. See image - modify.
Then finish the modify and you will see the wall follow the stair or outline you have specified. See image finish.
Both options will work.
LD
Yes, Lisa , you are right - your solution is definitely the most appropriate in case of straight walls.
The workaround proposed by me is more suitable for curved walls or jagged wall succesion , where the Edit Profile for wall can not be applied to. This workaround allows. also to lock the "phantom roof" to the stair underside and thanks to this , moving the stair the wall will keep attached to it..but as any workaround is less handy ....
Constantin Stroescu
Can't find what you're looking for? Ask the community or share your knowledge.