Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Placing a void extrusion through a structural beam system (roof cladding)
Placing a void extrusion through a structural beam system (roof cladding)
I've made a corrugate roofing profile and then placed the profile in a beam system. All is going well until I get to the end of the roof where it has an angular cut rather than a 90° cut. I've tried placing a void extrusion through the overhanging roofing sheets but that hasn't appeared to have worked. Any suggestions would be greatly appreciated.
