I'd like to hatch a parcel with the concrete pattern but it shows broken. I know I could relocate the origin for a polygon hatch but is there a fix for using in a parcel?
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Hi Joe,
Something like this?
Dave
Dave Stoll
Las Vegas, Nevada
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Joe,
Can you post a pic? I'd like to see that.
Dave
Dave Stoll
Las Vegas, Nevada
I'll try to get that tomorrow. I was in the weeds today
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
There is no Hdialog when applying to a parcel - thats the problem, but thanks for the input
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Sorry, my ignorance of Civil3d is fairly complete.
This looks like a case where a more accurately specified hatch pattern would provide an answer to the loss of precision arising from using a pattern at coordinates well away from the hatch's current origin.
It's been a while since I posted here. I hope the attachment works, otherwise cut and paste the pattern directly from this panel.
*AR-CONC2,Random dot and stone pattern
;-------------------------------------------------------------------------------
; Pattern written by HatchKit v2.7 Hatch Pattern Editor
; HatchKit v2.7 Hatch Pattern Editor(c) Cadro Pty Ltd 1990-2008.
; www.cadro.com.au/hatchkit/
;-------------------------------------------------------------------------------
71.4514447388,1.4974,1.1645,1.9182358991,6.93976736169,0.6374,-7.0114230388
-34.0000000164,1,1.5,5.16218792505,7.37236840008,0.6,-6.59999999993
21,1,1.5,4.87024966,5.89789472,0.75,-8.25
96.6356447388,0.88937,1.8621,2.87735384866,10.4096510425,0.9561,-10.5171345582
-8.81580001637,0,2,7.74328188758,11.0585526001,0.9,-9.89999999989
46.1842,0,2,7.30537449,8.84684208,1.125,-12.375
100.451444739,0.59772,-0.052293,1.9182358991,6.93976736169,0.6374,-7.0114230388
-5.00000001637,0,0,5.16218792505,7.37236840008,0.6,-6.59999999993
50,0,0,4.87024966,5.89789472,0.75,-8.25
7.75374509883,0,0,0.569612851418,3.28209676876,0,-15.521210552
7.75374509883,5.1727,3.9691,0.569612851418,3.28209676876,0,-15.521210552
7.75374509883,10.488,8.0478,0.569612851418,3.28209676876,0,-15.521210552
9.74000554536,-3.23,0,2.14228105711,12.4803846346,0,-5.91715400847
9.74000554536,-0.83385,-2.1957,2.14228105711,12.4803846346,0,-5.91715400847
9.74000554536,2.9852,-5.6952,2.14228105711,12.4803846346,0,-5.91715400847
68.8819167095,6.4569,-5.5342,9.21397900388,5.06097174029,0,-10.9268936556
68.8819167095,-0.12152,-1.3432,9.21397900388,5.06097174029,0,-10.9268936556
68.8819167095,-2.23,0,9.21397900388,5.06097174029,0,-10.9268936556
56.2970215044,0,0,1.10616853275,9.56652017074,0,-4.74095117039
56.2970215044,3.7873,0.49861,1.10616853275,9.56652017074,0,-4.74095117039
56.2970215044,10.103,1.3301,1.10616853275,9.56652017074,0,-4.74095117039
Hugh
Joe have you tried what I sugested?
"Have you tried relocating to a UCS closer to the parcel then regenerating the view?"
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Can't find what you're looking for? Ask the community or share your knowledge.