the content OOTB is not dynamic but you could explode it, stretch etc and
create the ones you want.
If I remember correct that would mean 9 models!
I create mine from scratch and they are individual windows and not
altogether and would need to be altered each one.
Not the answer you were after I'm sure.
I'm sure I've seen this on the wish list before.
If you have some experience with DWA's it might be possible to create one
with windows set at 45d each end as blocks inserted. Height would be
dynamic. Width for the wings would be based on the straight not the 45 and
the block would distort the frame as stretched. You seem to indicate that
width would not change, only the centre width so it should be ok. I don't
know how it would sit in the wall though. Might need to be a CWA instead.
I'd manually create and move on. 😞
wrote in message
news:6313062@discussion.autodesk.com...
Hi Nathan
Thanks for getting back to me.
I enclose details of the bay window type, and I would like it to be able to
change in width & ht.
The centre width to be 915,950,1200mm & the ht to be 1200,1350,1500mm.
Thanks again for any help.