Scott,
I've noticed the same thing and wondered the same - and I've only been
trying to use the program for a very short time. I don't know if I'm
misusing the software or if Revit is just not ready for prime time yet.
I don't know if the developers ever had work experience in creating
structural drawings or not. I am trying not to become overly frustrated
with Revit's limitations and Prozac speed. I'm hoping things will get
faster as my understanding improves.
I find it disconcerting (to say the least) that the simple basic questions
I've posted thus far have for the most part gone unanswered or just answered
with a 'Revit does not do that'. (This might be the answer, but it is not
the CORRECT answer, Autodesk.) (Perhaps Autodesk's hoisting their
newsgroups by its own petard has something to do with the lack of
traffic/feedback/answers/replies/workarounds? I don't know.)
I hope someone can provide you with a better answer. At least know that
you're not alone.
Regards,
David Kozina
wrote in message news:6055417@discussion.autodesk.com...
We are having a problem with wall foundations that claim that their
Elevation at Bottom varies, when in fact it does not. An example is shown in
the attached image. The longer of the two wall footings correctly indicates
that its Elevation at Bottom is -1'-4", until it joins with another wall
footing of the exact same type and Elevation at Bottom. Once it joins with
another, it incorrectly indicates that its Elevation at Bottom "Varies."
(The other foundation continues to correctly report it's Elevation at Bottom
as -1'-4".) The incorrect value for the longer footing messes up footing
schedules and tags in the foundation plans. I figure that this has to be a
bug, but I found no mention of it in this forum, and only one mention of it
at AUGI (http://forums.augi.com/showthread.php?p=900909#post9
00909){color:#000000}.{color} I posted a copy of a simple .rvt file with
this problem in a post in the aforementioned AUGI thread. Is there something
specific that triggers this misreporting of elevation? Anything we can do to
avoid it? Revit becomes much less useful when it starts misreporting its
data.
Scott Johnson, Ph.D.
CAD/BIM Manager
Richard L. Bowen + Associates