Revit Architecture

Reply
Contributor
Rebel1
Posts: 20
Registered: ‎02-15-2011
Message 1 of 5 (1,100 Views)

Door Tags

1100 Views, 4 Replies
09-13-2012 09:13 AM

Being new to Revit I placed doors throughout my plan, but the door tags do not show.  How do I turn them on and off for doors window etc.?

Active Contributor
jesser
Posts: 30
Registered: ‎04-29-2011
Message 2 of 5 (1,086 Views)

Re: Door Tags

09-14-2012 06:25 AM in reply to: Rebel1

Did you tag the doors in addition to placing them?

 

If you did tag them then check visibility graphics and under the annotation tab check to see if door tags are unchecked.  If so check them on to be visible.

 

If you didn't tag them then you can easily use the Tag All tool located under the Annotate tab.  In your view of choice to see the tags, choose the door tag (under Tag all) and voila all your doors are tagged.  (assuming that door tags are on in visibility graphics)

 

Jesse Remick

"Sometimes the solution is so clear you see right through it."
New Member
Posts: 2
Registered: ‎04-22-2013
Message 3 of 5 (841 Views)

Re: Door Tags

04-22-2013 09:36 AM in reply to: Rebel1

Hey, I've got a door located on a diagonal wall that needs to be tagged. See where I'm going with this? Anyone got any ideas how to get a diagonal door tag. Revit has only the two options horizontal and vertical. Like Help!

*Expert Elite*
constantin.stroescu
Posts: 830
Registered: ‎10-29-2008
Message 4 of 5 (825 Views)

Re: Door Tags

04-22-2013 12:17 PM in reply to: harold

select the door tag , click on Mode>Edit Family

in Family Editor >Properties>Rotate with Component>check it and load it into project again

Constantin Stroescu
BIM Manager AGD
New Member
Posts: 2
Registered: ‎04-22-2013
Message 5 of 5 (816 Views)

Re: Door Tags

04-22-2013 01:16 PM in reply to: constantin.stroescu

Hey Thanx Boss, Rotating the tag kinda works. In the normal tag mode there are horizontal and vertical options. The Rotate with component check box works but not give options, i.e. dia 45 deg. or 135 deg. We'll work with it a bit more see what works. Thanx hgf

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Revit Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Revit helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Revit

Twitter

Facebook

Blogs

Youtube