Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

API: Bars Under The Curtain Walls

1 REPLY 1
SOLVED
Reply
Message 1 of 2
Romanich
1203 Views, 1 Reply

API: Bars Under The Curtain Walls

Hello there,

We already know, that the panels with a calculation model curtain wall must be placed only on the panel's or opening's edge. We should create dummy bar on the bottom of the curtain wall to take one to the calculation model in any other case. If model has a lot of curtain walls (for example model from Revit) this is a problem. 

To solve this issue, I have written small add-on: just select necessary panels in Robot and press Create button. It has some limitations: panels should have object type Contour with 4 vertices and 2 vertices at the bottom must have similar Z coordinates. Only panels 1 and 2 will be taken into account:

15.png

When process has finished, created bars automatically highlighted in the model. Moreover, user will obtain the list with numbers of panels which was not taken into account.

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Tags (2)
1 REPLY 1
Message 2 of 2
Rafal.Gaweda
in reply to: Romanich

Nice, added to list of our API addins


Rafal Gaweda

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report