Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

(API) Addin: Walls To Loads

8 REPLIES 8
SOLVED
Reply
Message 1 of 9
Romanich
2872 Views, 8 Replies

(API) Addin: Walls To Loads

Hi,

This addin will create loads from the selected walls.

Known limitations:

only rectangular walls with the object type Contour will be converted
- openings are not taken into account
- if number and name of the load case is empty, load case Walls with number 99 will be created

it is necessary to save/close/open the model after adding/modifications and start the addin to set object numbers in loads table (the reason is small bug in API)

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Tags (4)
8 REPLIES 8
Message 2 of 9
Rafal.Gaweda
in reply to: Romanich

Cool. Added to our list of addins


Rafal Gaweda
Message 3 of 9

Hi Admin

 

Ii is very useful for me, But I am understanding how to use it?, Can you take short video, Please!

 

Thank you

 

Fan Robot Structural Analyse!

Message 4 of 9

Xin chào,

 

https://youtu.be/RSv3MVzyumA

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Message 5 of 9
MHDCACO
in reply to: Romanich

Hello, is it working for RSA 2024?

Message 6 of 9
Romanich
in reply to: MHDCACO

Hi @MHDCACO,

 

It should work.

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Message 7 of 9
MHDCACO
in reply to: Romanich

I have transfered Partiton Wall from Revit to robot and when i use your application it just create a polyline. IWhat can be the issue?

Message 8 of 9
Romanich
in reply to: Romanich

Technically the linear load should be assigned to polyline. Please check if the correct material is assigned to the partition wall.

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Message 9 of 9
MHDCACO
in reply to: Romanich

Yes It was the material. I've changed it but i notice sometime it works sometimes not.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report