A feature in most, if not all of the competitor point cloud editors, is to delete the points outside a select window/marquee, as well as the option (the current Recap option) to delete points within. Would greatly speed up point cloud editing. Show More

When creating a mesh of detailed objects with an irregular shape, that contains holes or voids in patterns, holes are closed. Allow Precise Reconstruction of mesh model for Scan-to-Mesh in ReCap Pro, which will consider any voids and holes in the model.  Show More

Please, add functionality to control the display of the NWD models that were attached to ReCap projects. Currently, when an NWD model is attached and displayed in RealView, only colors from layers seem to be visible, so it looks like a Conceptual view in AutoCAD. It is not possible to display a Realistic view or any texture. Show More

I have a project that used 1.5" diameter spheres survey control coordinates. Recap would not recognize the sphere as a target, even with several hundred points on it. I realize this is an usual sized sphere compared to the standard 6", but it would be nice to have the option to specify what diameter sphere Recap should look for while registering if it differs from "standard" diameter spheres. This would work for larger spheres as well.     Show More

When creating dimensions from columns or large pieces of equipment often we need to dimension to the centerline.  It would be nice if we are able to dimension directly from the center line like we are able to dimension from a pipe currently.  Currently we have to create a dimension from the face of equipment to opposite side of the equipment.  Then we need to do a dimension from the flange of a column to the opposite flange.  We can then assume the centerline of each.  Finally we can take the calculated centerlines and add those values to the final dimension from flange of column to face of the equipment.  To check true alignment of equipment you need to check centerline against multiple columns so you could go through creating 18-24 dimensions when you really only need to do 6-8.   Hopefully you can follow the jumbled mess but I attached a picture to help.  Also can we finally fix the rounding of dimensions?  You can see in the image that 4/8" is showing rather than 1/2".  Our engineers love to poke fun at that one for the past 2 years.   Thanks, Show More

More often than not, I can use manual registration to get scans registered roughly in the correct position, but they will be up to a few hundred mm out of alignment. I would like to be able to nudge them into position along the x, y and z axes. What I envisage is to choose a scan, specify an increment to move it by, rotate to the view plane you wish to move it in and use the keyboard arrow keys to tap it into position.   This idea was initially posted on the discussion page, where it received some support. Show More

I am logging this on behalf of a customer in Germany:   "We would like an option to sanitize RealViews I’m sure you are aware of the strict German privacy laws – we currently have a manual process to blur faces and vehicle registration plates, but it would be a quicker process if it could be done in the RealViews themselves. ZFS SDK Implementation Selection scans are a key feature on the Z+F Imager series, to capture targets at long range for a superior registration result. However, when importing a ZFS with selection scans associated with it into Recap Pro, the selections no longer seem to be associated with the main scan. The selections simply load as a new standalone scan. This loses the option of using these selections to position the main scan, which limits the usefulness of Recap Pro as a registration tool. Is there the possibility to improve this implementation?"   -Scott  Show More

Hello dear Recap-Team,   it is a bit annoying that you can only move single scans and not several at once into a scan group. Moreover, it wouldn't be bad if this grouping is preserved even after importing into another ReCap project (e.g. into a master file).   Show More