Moldflow Ideas

Anonymous · ‎10-26-2018

Add a cutting plane tool within a desired LCS location with the ability to rotate and move the plane about any axis (XYZ).

D50 · ‎12-11-2019

I hope to add the functions/attributes to get the maximum,minimum value in the x,y direction of the part. If it does, there is good things: In Geometry tab - Craete - Cooling Circuit, The Number of channels can be calculated automatically by inputting the Distance between channel centers.

Anonymous · ‎08-09-2018

Anonymous · ‎07-14-2019

Hello, Is it possible to determine the Shrinkage/Warpage in the moldflow insight and then perform the Reverse Engineering. for e.g Defining the geometric dimensioning and tolerances to the parts on the design stage and after the first of tool parts (sample part) performing in Detail testing of those tolerances using the optic meterology. Comparision of the actual data to the design data and thereby performing the sensitivity Analysis and also the design of experiments considering the different Inputs/Parameters for the next design of the parts if the material remains the same. In short, can we use the deflection/shrinkage resullts from Insight and perform the reverse Engineering for better design of new parts. Any Suggestion or recommendations would be very Kind. Kind Regards Samkit

Anonymous · ‎08-09-2018

Add a " result navigation" feature similar to the entity navigator; For example, we can navigate to elements that carry higher temperature and shear. This would save a lot time in trying to identify potential problem areas.

Cutting plane tool

Synergy API: add the functions/attributes to get of the part

increase number of curves in XY plot properties

Prediction of Shrinkage and thereby Warpage

Result Navigation

Forums Links