Fusion Educators (Read-Only)
Are you an educator who uses Fusion (formerly Fusion 360) in their courses in secondary and post-secondary? This is the official Autodesk forum for educators like yourself to share the success you are having with Fusion in the classroom.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Unable to select to extrude

2 REPLIES 2
Reply
Message 1 of 3
laurie_dale
120 Views, 2 Replies

Unable to select to extrude

Hi there, I am pretty new, so I apologize if this is a simple fix. I am trying to extrude from the drawing I added to the left of the box in thecircle.  I did check that the drawing was closed.  Any suggestions are greatly appreciated.Screenshot 2023-08-31 082737.png.

2 REPLIES 2
Message 2 of 3
kellings
in reply to: laurie_dale

Hi @laurie_dale In your image, the lines shown are dashed. That means they are construction lines. Construction lines are ignored for solid modeling operations. You can't extrude them, you can't revolve them, you can't sweep them, etc. 

 

If you right click on that sketch and choose edit sketch, you can then select those sketch entities and in the sketch palette (on the right of the screen usualy) you will see a line type option. Once you have the sketch entities selected, click the construction line type button to deselect it and turn the sketch geometry into solid lines. Then you should be able to create your extrude. 

linetypetoggle.png

 

If you have any issues, please let us know and we'll see what the next step are.

 

Thanks,

 

Kevin

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.
Message 3 of 3
kellings
in reply to: laurie_dale

Hi @laurie_dale Were you able to get this issue resolved?

 

thanks,

 

Kevin

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

You've got Fusion.


Autodesk Design & Make Report