Fusion Educators (Read-Only)
Are you an educator who uses Fusion (formerly Fusion 360) in their courses in secondary and post-secondary? This is the official Autodesk forum for educators like yourself to share the success you are having with Fusion in the classroom.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

assembly lines

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
bpesek0
112 Views, 3 Replies

assembly lines

Hello, I have assembled this frame out of a few parts and you can se lines where they have merged. As I need to make a drawing of this i need them gone. Can you help me?

Snímek obrazovky 2022-08-10 v 15.53.23.png

 

3 REPLIES 3
Message 2 of 4
kellings
in reply to: bpesek0

You have a couple of options here. A fairly automatic way would be to use the combine command to subtract away portions of the overlap that you don't want. Make sure you check the box to keep tools when in the combine command. 


You could also manually draw and extrude the areas away that need to cut. 

 

If you need some help, post your file here and I can edit it to show you how it would work. 

 

Thanks,

 

Kevin

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.
Message 3 of 4
kellings
in reply to: bpesek0

Hi @bpesek0 were you able to make any progress with this one? 

 

Thanks,

 

 

Kevin

Kevin Ellingson
Technical Specialist

If my post resolves your issue, please click the Accept Solution button.
Message 4 of 4
bpesek0
in reply to: kellings

Hello, yes I got rid of the lines with the combine command.

Thank you! 

 

 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

You've got Fusion.


Autodesk Design & Make Report