Is there a way to measure volume (or mass if given density) of a body?

AvihooI
Contributor

Is there a way to measure volume (or mass if given density) of a body?

AvihooI
Contributor
Contributor

I would like to measure the volume of a body in order to figure out what its mass would be. Is that easily possible in Fusion 360?

1 Like
Reply
Accepted solutions (1)
8,927 Views
15 Replies
Replies (15)

Anonymous
Not applicable
Accepted solution

Hi You can get those properties by right clicking on the root component at the browser and select properties: Two screen shots to show you here:

 

undefined

 

undefined

4 Likes

AvihooI
Contributor
Contributor
Thank you,
I actually found out that feature two hours after asking the question and was giving myself a facepalm 🙂

It's good to have this as reference though cause I couldn't find it using the search option or on google!

Thanks again!
0 Likes

Anonymous
Not applicable

Hi I deleted the last post because I would like to add a few more points. Yours is a great question! I used  "Mass" from Properties to estimate the approximate cost of materials to be used in the actual model. Most of our projects will be made by Plastic Injection Molding method and the approximate Mass is quite important. To get the X, Y, Z dimensions I would save an STL file of the model and use a 3rd party 3D reader to get the dimension information.  When 2D drawing is available for Mac Fusion users we should be able to get the dimensions within Fusion.

1 Like

jfanchin
Observer
Observer

Just wanted to check on if the volume/mass calculation is available for Mac yet?  Having some trouble locating ...

 

Thank you

0 Likes

Phil.E
Community Manager
Community Manager

Hi thanks for posting to the forum.

 

The properties for your parts are found by right clicking on the component node in the browser. Use "properties". It's the same for Mac or Windows.

 

properties.png 

 

Thanks,

 

 





Phil Eichmiller
Software Engineer
Quality Assurance
Autodesk, Inc.


0 Likes

jfanchin
Observer
Observer
Thank you, I found that info on the Internet, but the root cause of the issue was that I was using an Apple mouse that didn't have a right click button. I assumed the Mac version was different and that commands might have been located differently, but once I guessed that it might be as simple of a hardware issue I was able to get it sorted out.

It might be a great helpful tip online though to make sure you have full functional mouse to access all features.

Thank you,
Joe

Sent from my iPhone
0 Likes

Anonymous
Not applicable

I design a Steel parts over 100 kg, density  is 7.8 kg / m^3, how to change density    0.0078 g / mm^3 to 7.8 kg/ m^3?

0 Likes

Anonymous
Not applicable

Hi,

 

Your calculation is exactly the same, just divide your answer by 1,000,000.

 

Brett.

0 Likes

Anonymous
Not applicable

@Anonymous wrote:

Hi,

 

Your calculation is exactly the same, just divide your answer by 1,000,000.

 

Brett.



Thank you your help. But this not my want, we need to know some casting parts over 1000 kg, the density g/mm^3 can't fit our request.


@Anonymous wrote:

Hi,

 

Your calculation is exactly the same, just divide your answer by 1,000,000.

 

Brett.


 

0 Likes

Anonymous
Not applicable

Sorry, I think I may have misunderstood your question.

 

What are you trying to do?

 

Brett.

0 Likes

Anonymous
Not applicable

Try this.

 

1m^3 = 1,000,000,000mm^3

 

The specific gravity of steel = 7.85

 

The formula for a piece of steel in kilograms is - ((volume in mm^3) x 7.85) / 1,000,000)

 

The mass of a cubic meter of steel  is 7,850kg     -     I.E. 7850kg/m^3

 

The formula for a piece of steel in grams is - ((volume in mm^3) x 7.85) / 1,000)

 

The mass of a cubic millimetre of steel is 0.00785g     -      I.E. 0.00785g/mm^3

 

To get the weight of any other material - substitute the specific gravity of that material for the number 7.85 in the calculations above.

 

Does this solve your problem?

 

Brett

 

 

1 Like

Anonymous
Not applicable

Thank you for your reply.

 

thank you. 


@Anonymous wrote:

Try this.

 

1m^3 = 1,000,000,000mm^3

 

The specific gravity of steel = 7.85

 

The formula for a piece of steel in kilograms is - ((volume in mm^3) x 7.85) / 1,000,000)

 

The mass of a cubic meter of steel  is 7,850kg     -     I.E. 7850kg/m^3

 

The formula for a piece of steel in grams is - ((volume in mm^3) x 7.85) / 1,000)

 

The mass of a cubic millimetre of steel is 0.00785g     -      I.E. 0.00785g/mm^3

 

To get the weight of any other material - substitute the specific gravity of that material for the number 7.85 in the calculations above.

 

Does this solve your problem?

 

Brett

 

 


 

0 Likes

robduarte
Collaborator
Collaborator

I posted this video on the topic recently: https://www.youtube.com/watch?v=TikstpkcRuI

Rob Duarte
Associate Professor in Art, Florida State University
Co-Director FSU Facility for Arts Research
http://art.fsu.edu/rob-duarte/

Twitter | YouTube

0 Likes

Anonymous
Not applicable

How check the density/mass of the part in the mobile app. Is it possible  I haven't found any info about this or is the mobil app only a viewer program that can't measure mass? 

0 Likes

g-andresen
Consultant
Consultant

Hi Mattias,

try it this way:

mobile_masse anzeigen.png

regards

günther

0 Likes

Type a product name