Is it possible to number the parking stalls on the drawing automatically?
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Solved! Go to Solution.
Solved by TiStars. Go to Solution.
Solved by viji.kumar. Go to Solution.
Yes, it is, Neil. Please let me know if the article provided helps.
Vehicle Tracking: Parking Bay Numbers
If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!
Cheers
Viji

neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Yes. A very informative discussion group. Another question of numbering, can the total for a module be shown? Let me re-phrase that. after reading Neil's sequentialing tip.
when laying out double sided stalls can we show the total number for left and right? what I see now is total left and grand total on the right.
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

This picture should help clarify what I want to do.
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Hi Joe
Thanks, that makes it clear. The bay numbering is not the utility to summarise the number of bays or types of bays. The Parking Report shown below does but only breaks down the total using the categories shown.
I hope that helps,
Cheers
Viji

Hi Joe
I have provided a link to a short video (3:13) with a workaround to generate a report with bay numbers on either side of a double-sided parking row. This is done by naming the zones.
Reporting Bay Numbers for Double-Sided Rows
If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!

Google brings me here however Viji's link is dead. I managed to figured it out and beow are the steps:
天涯海角的山姆
您认为此帖子是否有用?欢迎为此帖点赞。
您的问题是否已得到解答?请点击“接受解答”按钮。
Can't find what you're looking for? Ask the community or share your knowledge.