Kinematic envelope for light rail track design

[Olga-L]

Hello,

I am working in vehicle tracking for designing Light Rail track using Guided Drive option. I need to see so called "Kinematic envelope" (DKE, probably it is "car clearance" in terms of vehicle tracking) on straight and curved segments (as an addition of ~15 cm to the vehicle's total width), but can't find any option or settings for configuring it. "Default clearance envelope" for Auto Drive doesn't help (ok, this is another drive mode). Any help with this question will be highly appreciated.

Olga L

[M_Mendoza]

Hello @Olga-L 
I suggest you try the following;
Select the sweep path you created, then go to the ribbon select the Vehicle Tracking tab»»Review Panel»» Properties command.
In the Properties dialog box go to the Reports tab left side, then on the right part displays Report 0001 Body and Chassis Envelopes, select the Body outline (Plan) option, then on the buttons at the bottom right select Edit.

In the new dialog box you will have two tabs where you can configure the envelope of your vehicle.

img_215.jpg

I hope you will be useful.