Mark,
Your Mixing up SendCommand with SendKeys (or SendMessage). SendCommand is
only available in A2K as part of AutoCAD's Object Model - and it is
probably quite a bit more stable than SendKeys or Sendmessage.
--
Phillip Kenewell
CAD Systems Technician
Air Gage Company
pkenewell@airgage.com
===================
> Not < a Member of the AutoDESK
Discussion Forum Moderator Program
Mark Smith wrote in message
news:7us9k4$mhf13@adesknews2.autodesk.com...
> I don't think that there is a way to get the ghosting with the object.move
> method. You should be able to see get it with the SendCommand. Make sure
> that your dragmode variable is set to Auto (I believe that is the correct
> setting).
>
> Just a suggestion. You may have better luck using EvalLispExpr within
> acadunsupp.arx. I was using the SendCommand to insert a block and I found
> it very unstable. Sometimes it would work and sometimes it wouldn't. I
> haven't had a problem since going to the EvalLispExpr method.
>
> Give it a try.
> Good Luck
