Now Available! Updated Excel & Revit Add-in's

[jessica_smith]

This is just in! Autodesk Tandem has released updated versions of our Excel and Revit Add-Ins. They are available for download from the Autodesk Knowledge Network site: click here for Excel and here for Revit.

Don’t forget to review these pages in their entirety as they contain the latest and greatest information about these add-ins.

For the Excel Add-in, users may have to add Autodesk Tandem as a Trusted Publisher. To do so, follow the instructions below.

1. To check if Autodesk is listed.
   1. From the File menu, click on Options (at the very bottom).
   2. Open Trust Center, then Trust Center Settings…
      
   3. Click on Trusted Publishers. If Autodesk is listed, then you should be all set. If not, continue with these instructions.
2. Open Add-ins
3. From the Manage drop-down, select COM Add-in. Click Go
   
4. Select Tandem.Excel. Click ok
5. Close Excel, and open the File explorer.
6. In the navigation bar, enter the following:
   
7. Open the Microsoft folder, then Add-ins, Autodesk, and Tandem.
   
8. Find the file titled Tandem.Excel.dll and right-click to open the Properties.
9. Navigate to the Digital Signatures tab, select Autodesk, and then Details
10. Click on View Certificate, then Install Certificate….  The Certificate Import Wizard will open.
11. Select Local Machine, Next, and click Yes.
12. Click on Place all certificates in the following store, then Browse and select Trusted Publishers file.
13. Click ok, Next, and then Finish.
14. Close out of all the Properties windows and open Excel
15. Go back to the Options sections, Trust Center, Trust Center Settings, Trusted Publishers, and Autodesk should be listed.
16. Repeat steps 2 through 4 from above.
17. Click ok, and the Autodesk Tandem tab should appear in the ribbon.