Robot Analysis for MEP Modular Support System?

[Anonymous]

Hi Guys,

I'm new to Robot Analysis and currently an ETABS user. My goal is to use Robot Analysis for designing MEP Modular Support System, the Steel Frame Structure is preferably Strut Channel or C-Channel typically.

Any reference such as handouts or user guide that mention how to customize this in Robot Analysis is very much appreciated.

as a BIM enthusiast its easy to say that linking all this data, using the same models is just a breeze, but actually its a tedious work and requires a massive efforts but most importantly its cost inefficient. I think using the range of platform of ADSK AEC packages will hopefully create an significant impact of reducing the time and minimizing the errors.

Thanks and Best Regards..

[EduardoMeruvia]

Hi @Anonymous , 

I would recommend watching Robot's available webinars. I found them very useful in all aspects. See link below for Webinar on steel design. 

https://www.youtube.com/watch?v=GhP9An47EKw&list=PLY-ggSrSwbZqow_60fiqJwS69mg1nQMzk&index=4&t=0s

Link to all Robot's webinar; 

https://www.youtube.com/playlist?list=PLY-ggSrSwbZqow_60fiqJwS69mg1nQMzk

Hope it helps!