Hello,
More errors with load distribution on cladding.
1. Screen shot 1
some trapezoidal loads which shouldn't be there.
2. Screen shot 2
- trapezoidal loads on member 24?
- incorrect udl on member 27.
pressure of 0.5, tributary length 6.59/2 + 6.61/2, loads should be 3.3. loads reported is 1.65. all kN and m.
- graphic load distribution regions show some arrea atributed to member 130 from upper cladding where it shouldnt be any as the upper cladding element spans parallel with member 130.
Am I doing something consistently wrong or the cladding element is playing?
