Structure Wall

[ihsanhalim28]

Hello, I want to ask, why does my wall have an opening/void while the profile wall is full

[ennujozlagam]

difficult to tell? in 3d view activate your bulb icon, it could be the there is wall in between that is hidden? or void mass in-place?

[ihsanhalim28]

no sir when i turned on the bulb to reveal the hidden object

[alan.johnson7YLND]

Can you share your project file?

[alan.johnson7YLND]

There could be an architectural element (wall) intersecting 

Try changing the discipline to coordination.

[boliveira625L4 · Accepted solution]

I had the same problem a while ago, I saw something hidden that was not shown on the bulb of hidden objects, this is because the file was using phasing to control elements in the view when I turned it all on, I could see a wall going through my structure and causing the problem 

[alan.johnson7YLND]

Without seeing your file it could be either an architectural wall or a structural wall in a different phase that was drawn first, then when your structural wall is drawn intersecting it, there is a gap showing.

So you need to check for an Architectural wall or a Structural wall in a different phase

[JoshuamRivera]

Thanks for sharing, It can be due to a setup with Phasing, review those options/controls. Another thing can be going to your 3D view under Graphics properties , Show Hidden Lines options to switch the elements by discipline and so on.

Best wishes

Joshuam - Structural BIM VDC Design Director 
Feel free to Like this post if you find it to be helpful.
Click on the ACCEPT SOLUTION button if your question was answered.

 Contributor