Revit Stairs different riser height

[Ahmed_Muharram]

Dear all 

i am trying to model a stair case with different riser height in last riser as shown here in the picture.

is there any professional way to model it as a stair case not model in place.

[A_MAQ]

i do not think that can be done as stair case , the only solution is model in place as i know

[PrathapSekar · Accepted solution]

@Ahmed_Muharram, 

We faced the same situation, We done floor instead of Landing.

[ToanDN · Accepted solution]

@Ahmed_Muharram

Build a normal stair then place an extra layer on top of the treads where the height increase.

Or, export the entire stair to SAT. Import it back in as generic model and edit in place to change the height of the odd steps.

What is the reason behind this, physical constraints?

[Ahmed_Muharram · Accepted solution]

the consultant need it as stairs not model in place , the reason for the small riser is that the finishing in floor landing is a different type...

[A_MAQ]

yes that is a way , or even export it to ifc 

but while exporting to ifc and import it back and explode it , it gives me this warning if i edit the height 

[Anonymous]

could you please explain "extra layer on top of the treads where the height increase." what do you mean with this ?

thank you in advance

[ipselute · Accepted solution]

@Anonymous: You create an architectural stair. Define different finishing height for risers and landings. The concrete height will adapt automatically, the concrete height will follow the height of the finishing. Then select the concrete stairs, go to Properties Palette, make it structural, or check "can host rebar" option.

[daniel.gheorghe5GJK4]

you sir, deserve a medal. Congrats!

[ipselute]

@Ahmed_Muharram: If you like my idea , please mark it as Solution.

[swelwinmyintQA9JD]

Is there any other solution if need to show structural items only ?