Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I'm trying to create in place model for a curved bridge/overpass using swept blend with the help of Civil 3D for the centerline path. And i've encountered some problems regarding the reference planes used for profile 1 and 2 in the swept blend when modeling at the spiral alignment from Civil 3D.
Can we rotate the reference plane in the swept blend so it can match the section intended? If not, how do we solve it?
Your profile will always be perpendicular to the path of the sweep, it means the start of your path is not perpendicular. One option is to correct your path zo it starts absolutely perpendicular. Another option is to extend your path and trim the end of it with a void solid. Not particularly nice, but it works.
