Choices for driving openings
Edit Profiles/Boundary
-Tend to do this if it is a prefab element.
Wall/Vertical Openings
-Wall openings if it is something that will be created on site (new opening in the wall) and is of rectangular shape.
Shafts
-If it has to cross several floors and needs to stay aligned (utility shafts, elevators).
Host based family
-Used for openings like pass through of pipes/ducts (works well for Dynamo script to automate placement).
But these are general rules where I easily can deviate from if impractical or other solution is faster/eassier.
Voids tend to have bigger impact on performance. So might avoid them (especially when used in large quantities).
Might also be discussed with other companies/teams/modellers what preferred methods are.
Louis
Please mention Revit version, especially when uploading Revit files.
Hi Chris,
Good day to you. Thank you for submitting your question in our discussion forums. Have you had a chance to look over the suggestions provided by Louis?
Do you have any questions about it, let us know if you require further assistance.
If the suggestions helped you, please hit the "Accept Solution" button, as it helps make the solution easier to find for others who might have the same issue. Knowing which topics are solved or not can also help our many users find the questions that still need to be answered. It’s also a great way to say thank you and give recognition to whoever helped you.
For Floor opening specifically at Lifts shaft I would prefer to use shaft opening as you can have added advantage to use the symbolic line to represent void, if you don't use this you will end up drawing manually 2d linework and you need to do on each floor where ever you have manually edit the floor.
