When I rotate the tee family, revit changes for another family

uoliveira · ‎09-04-2023

Hi Guys,

I have modelled this tee family (90 degrees), which has some problems when I try to rotate it. I do not know but maybe is regarding the function of the routing preferences. Then, when I rotate using the default command into Revit, it changes for another tee family loaded before which is with 45 degrees. How can I rotate and make it does not change for another family and remains the same?

Thank you!

ennujozlagam · ‎09-04-2023

go to family and untick always vertical and see if helps?

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

fabiosato · ‎09-12-2023

Hello,

First point, all connectors must be fittings.

The center connector needs the angle parameter attached to its angle parameter.

I advise making one family that flexes to the desired angles; this is how Revit expects the family to work.

Attached the revised family for testing.

Fábio Sato
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

When I rotate the tee family, revit changes for another family

When I rotate the tee family, revit changes for another family

Forums Links

Post to forums