Schedule circuit length

Jrooker06
Collaborator

Schedule circuit length

Jrooker06
Collaborator
Collaborator

Is there a way to create a data schedule or any schedule and have it reflect the circuiting length? I have attached a image to show what family I am talking about.

0 Likes
Reply
871 Views
3 Replies
Replies (3)

mromagnoli
Advocate
Advocate

Dear Jrooker06

You have to create a Quantities Schedule, within the Electrical Discipline you choose the category of "Electrical Circuit" and give it the "Length" parameter.

Then you will have to configure the table as you want, so that you compute the totals.

attach some screenshots that may help you.

 

length-circuit.PNG

electrical-circuit.PNG

best regards


Arq. Marco Romagnoli

AutoCAD Certified Professional | Revit Certified Professional | 3Ds Max Certified Professional | Fusion Certified User | Autodesk Certified Instructor | VRay Certified Instructor

0 Likes

Jrooker06
Collaborator
Collaborator

I was able to get this far but my issue now is that I can not add the room the device currently lives in.

0 Likes

mromagnoli
Advocate
Advocate

Jrooker06 escribió:

I was able to get this far but my issue now is that I can not add the room the device currently lives in.


Dear Jrooker06:

Now you want to associate the Electric Devices with the Rooms where they are?


That is very easy if you are doing the Electrical Installations in the same file where you have the Walls and Rooms.
Search in the Quantities Schedules that you will find parameters associated with the Rooms. There you can choose the name of the Room and know how many Devices you have in the Room.devices.png

 

Good luck!


Arq. Marco Romagnoli

AutoCAD Certified Professional | Revit Certified Professional | 3Ds Max Certified Professional | Fusion Certified User | Autodesk Certified Instructor | VRay Certified Instructor

0 Likes