Announcements

Starting in December, we will archive content from the community that is 10 years and older. This FAQ provides more information.

Revit MEP Forum
Welcome to Autodesk’s Revit MEP Forums. Share your knowledge, ask questions, and explore popular Revit MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Revit Model Display Issue? Line weight?

6 REPLIES 6
SOLVED
Reply
Message 1 of 7
HRLDesign
538 Views, 6 Replies

Revit Model Display Issue? Line weight?

Hey Hive Mind. 

I have inherited a model to work on for a project. however, when opening the file, the model displays as such. I have reset all line weights where I can find them to 1, and still no change.

Can anyone offer a solution to the issue? Thank you.

6 REPLIES 6
Message 2 of 7
iainsavage
in reply to: HRLDesign

What do you mean by "reset all lineweights"?

Please screenshot your view settings.

Also check what the actual penwidths are set to for each line weight "pen" number at the relevant view scale in Manage > Additional Settings > Line Weights.

 

Example:

iainsavage_0-1722948098926.png

 

Message 3 of 7
hmunsell
in reply to: HRLDesign

What is the view scale set to?

 

on a side note, you can probably sell that as an interpretative art piece 🤣....   

Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.



EESignature


Message 4 of 7
HRLDesign
in reply to: hmunsell

1:200 - reset it t 1:1 - problem solved! Thank you!

Message 5 of 7
iainsavage
in reply to: HRLDesign


@HRLDesign wrote:

1:200 - reset it t 1:1 - problem solved! Thank you!


Problem is only solved if you intend to plot at 1:1 - i.e. plot the drawings at the same size as the actual building!

 

You need to go into that settings table that I posted and check what actual pen width is associated with each line weight arbitrary number at each scale because that is what will plot on paper or PDF.

Message 6 of 7
HRLDesign
in reply to: iainsavage

Hi iainsavage

So those settings are exactly as you posted in this model, so it had to be something else displaying the issue I just didn't know what it was that was causing the bubble look.

I tampered with everything lineweights, graphics, visuals - scale is what reset it to what I needed to be able to see what on earth I was working on!

 

Message 7 of 7
iainsavage
in reply to: HRLDesign


@HRLDesign wrote:

I needed to be able to see what on earth I was working on!

 


Then use the Thin Lines display option (TL shortcut).

It switches off the lineweights on screen.

It is only a screen effect for use when working in the model, it does not affect how lineweights plot.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report