Pipe Riser Colors Not Showing in Reflected Ceiling Plan View, But Appear in Floor Plan Views

[dennyssefelix_visionarch]

I'm experiencing an issue in Revit where the pipe riser colors are not showing up when I create a reflected ceiling plan view, but they appear correctly in floor plan views. This issue only seems to affect vertical pipes; horizontal pipes and other pipe fittings appear correctly. I've checked the view range settings for the ceiling plan view, and they seem to be correct. Has anyone encountered a similar issue with pipe risers, or does anyone have any suggestions on how to troubleshoot this problem?

[iainsavage]

What method are you using to apply colour and fill to the pipes and fittings?

[Ahmed.Elmahdy]

Actually if you are using Color Fill it can be placed only in a floor plan or section. You can use another method like making filters.

[iainsavage]

Again:

What method are you using to apply colour and fill to the pipes and fittings?

[dennyssefelix_visionarch]

I assigned a material to each piping system

[iainsavage]

I'm getting the same results.

The vertical pipes don't take colour in the RCP (on the other two pipes it is the fittings which are coloured, not the vertical pipe segments).

I haven't used material overrides much for colouring so I'll leave this for someone else to respond to further.