Announcements
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Revit Duct modeling - make sloped and curved duct runs possible in Revit

Revit Duct modeling - make sloped and curved duct runs possible in Revit

On behalf of a customer from Germany let me add the following wish:  make possible to create sloped nad curved duct runs in Revit.

 

At this time there is not user friendly solution to model ducts parallel to curved ramps:

 

Kanal im Gefälle verbinden.jpg

 

For now, there is not user-friendly workaround available which generates additional issues:

https://autode.sk/301Oyed

 

 

1 Comment
Anonymous
Not applicable

Current duct system in Revit is only good for HVAC, not good at all for other industrial applications. For example, municipal odor control system will require all horizontal ductwork being sloped 1-2% for draining condensation water. Industrial dust collection system with Wet Scrubber will require ductwork at downstream of the scrubber sloped because the treated air from the scrubber will be saturated therefore condensation water should be expected and drained with sloped ducting.

Can't find what you're looking for? Ask the community or share your knowledge.

Submit Idea  

Autodesk Customer Advisory Groups


Autodesk Design & Make Report