Announcements
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Reference plane cuts for concrete beams and walls

Reference plane cuts for concrete beams and walls

You can cut steel beams at angles with reference planes, it would be good if this could be done with concrete beams and walls too.

 

auto.JPG

4 Comments
samuelsanf
Advisor
I think is possible (with named reference planes) using Part (Divide Parts). But I didn't know if this split the analytical model.
Anonymous
Not applicable

Yes it is possible using parts however that process is rather long winded, if we can cut using reference plane it will take 2 clicks !

Anonymous
Not applicable

Is there any way to cut concrete columns I think divided part is not possible with concrete column

bradwitt
Participant

When you slope a steel beam you can use a reference plane, in an elevation view to square off the end of the beams. For some reason you cannot do the same thing with a concrete beam. Concrete can be formed in any shape so this should be able to be accomplished the same way as a steel beam. Please see the video attached for the example. 

Tags (4)

Can't find what you're looking for? Ask the community or share your knowledge.

Submit Idea  

Autodesk Design & Make Report