REBAR IMPROVEMENT - REBAR CRANK AND LAP SPLICE

[shefypattambi]

Dear Developers,

Please consider to provide option to bend the rebar in plan especially at beam column joint and option for Lap splice in Area reinforcement. These are the 2 fundemntal requirements when considering the 3d modeling of the Rebar. But still there  is no straight forwared option in revit for this if my understanding is correct.

[johnl5PYL9]

When will this function be available? @peticid

Also, we need the option to crank the bar in any direction, eg beam laps where the bar may need to rotate to avoid a clash. possibly something similar to the rotate hook option.

[peticid]

Hi John,

Rebar splicing, including using cranking, is on our public roadmap.  You can test the current state of our prototype using the Revit Preview version. This is the dedicated forum thread, where you will find the feature summary and you can share your feedback after testing it.

In case you are not a member of the Revit Preview community, you can use this link to enroll.

Kind regards,

Dan Peticila, M.Sc. Str. Eng.

Product Manager | Autodesk Revit

[johnl5PYL9]

Thanks for your response.

[ahmadalrashed20]

Hi @peticid 

my manager tested the preview version, but it didn't have cranking 🙄

[peticid]

Hi Ahmad,

Thank you and your team for testing the Revit Preview release. Please do not share feedback about features which are not commercially available on this standard Revit forum, as this breaks the non-disclosure agreement signed when you joined the Revit Preview community.

We would really appreciate continuing this conversation on the dedicated Revit Preview forum thread: https://feedback.autodesk.com/project/forum/thread.html?cap=cb0fd5af18bb49b791dfa3f5efc47a72&forid={...

Kind regards,

Dan Peticila, M.Sc. Str. Eng.

Product Manager | Autodesk Revit