Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Level checkbok to include for consideration in view depths
[ ] Checkbox per level to include or exclude it when considering view depths.
Currently any level *With an associated view* acts as a reference for view depths. If someone accidently creates a view with a level intended as a datum- it wrecks the view depth interfering with the intended "Level below"or "Level above" in view templates for structural, architectural, Mechanical, Electrical plans and RCPs.
It would be very beneficial if the Building Story property would act as a filter for "Level Above" and "Level Below" in view range selection so only levels with this designation are select-able. This would allow for other Datums between these levels to serve as sill, header, top of steel, parapet, etc. Then whether or not someone creates a view from a Datum won't disrupt view ranges throughout the model.
