Revit Cloud Worksharing Forum
Welcome to Autodesk’s Revit Cloud Worksharing Forums. Share your knowledge, ask questions, and explore popular Revit Cloud Worksharing topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

gbXML Export the wrong height coordinate

1 REPLY 1
Reply
Message 1 of 2
wu1117
277 Views, 1 Reply

gbXML Export the wrong height coordinate

When I exported my project to gbXML and opened in SketchUp. the whole building was high in the air (shown below). I have the right elevation shown in the section view. gbXML code shows that the height coordinate is extremely high (>700). I wonder if anyone could help me figure out why the height coordinate is abnormal. Thank you.

 

<PlanarGeometry>
<PolyLoop>
<CartesianPoint>
<Coordinate>-75.97137</Coordinate>
<Coordinate>-8.177114</Coordinate>
<Coordinate>756.5</Coordinate>
</CartesianPoint>
<CartesianPoint>
<Coordinate>-52.63804</Coordinate>
<Coordinate>-8.177114</Coordinate>
<Coordinate>756.5</Coordinate>
</CartesianPoint>
<CartesianPoint>
<Coordinate>-52.63804</Coordinate>
<Coordinate>41.82289</Coordinate>
<Coordinate>756.5</Coordinate>
</CartesianPoint>
<CartesianPoint>
<Coordinate>-75.97137</Coordinate>
<Coordinate>41.82289</Coordinate>
<Coordinate>756.5</Coordinate>
</CartesianPoint>
</PolyLoop>
</PlanarGeometry>
<ShellGeometry id="aim0057">
<ClosedShell>
<PolyLoop>
<CartesianPoint>
<Coordinate>-75.97137</Coordinate>
<Coordinate>-8.177114</Coordinate>
<Coordinate>756.5</Coordinate>
</CartesianPoint>
<CartesianPoint>
<Coordinate>-75.97137</Coordinate>
<Coordinate>41.82289</Coordinate>
<Coordinate>756.5</Coordinate>
</CartesianPoint>
<CartesianPoint>
<Coordinate>-52.63804</Coordinate>
<Coordinate>41.82289</Coordinate>
<Coordinate>756.5</Coordinate>
</CartesianPoint>
<CartesianPoint>
<Coordinate>-52.63804</Coordinate>
<Coordinate>-8.177114</Coordinate>
<Coordinate>756.5</Coordinate>

1.PNG

 

2.PNG

Tags (3)
1 REPLY 1
Message 2 of 2
wu1117
in reply to: wu1117

I just figured out it's about setting project base point

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk DevCon in Munich May 28-29th


Autodesk Design & Make Report