Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

why view range doesnt work only to shipping container family?

6 ANTWORTEN 6
GELÖST
Antworten
Nachricht 1 von 7
Anonymous
481 Aufrufe, 6 Antworten

why view range doesnt work only to shipping container family?

attached example, please help

thanks

6 ANTWORTEN 6
Nachricht 2 von 7
ToanDN
als Antwort auf: Anonymous

Open the family and change it to Casework category. Why is it standing up?
Nachricht 3 von 7
barthbradley
als Antwort auf: Anonymous

Can you compress in another format? 

Nachricht 4 von 7
ennujozlagam
als Antwort auf: Anonymous

Try to nest in a generic model family and see if helps. Thanks




Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 5 von 7
Anonymous
als Antwort auf: ennujozlagam

thanks its working in the file

can you please explain "nest in a generic model family"?

Nachricht 6 von 7
Anonymous
als Antwort auf: Anonymous

and it needs to be stand for planning resons :leicht_lächelndes_Gesicht:

Nachricht 7 von 7
ennujozlagam
als Antwort auf: Anonymous

you wrote

can you please explain "nest in a generic model family"?

 

open your container family > then open a new family > Metric Generic Model.rft > load your container family to Metric Generic Model.rf > saveas give a new family name > then load to your project file. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report