Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

When I create a callout it is created as a different family type, for instance as a plan or a section. Please help me fix it.

1 ANTWORT 1
Antworten
Nachricht 1 von 2
robsonrogers
130 Aufrufe, 1 Antwort

When I create a callout it is created as a different family type, for instance as a plan or a section. Please help me fix it.

Every time I create a Callout it automatically is created as a plan system family when it should be created as a detail.

So I need to manually chose inside the properties menu the correct system family.

 

robsonrogers_0-1648740514774.png

 

So the next time I need to create a new callout it is created correctly.

 

robsonrogers_1-1648740515133.png

 

 

But, when I need to create a section, it stays as it was a Callout.

So I need to manually change the properties and tell Revit it is a Section.

 

robsonrogers_2-1648740514775.png

 

 

And when I need a callout again, it shows as a section, and go on.

 

Can anybody help me fix this?

 

Thanks

1 ANTWORT 1
Nachricht 2 von 2
RDAOU
als Antwort auf: robsonrogers

@robsonrogers 

 

 

There is nothing to fix...it will always preset the last used type. You will need to change the type manually if you are alternating from one type to the other

 

 

 

 

 

 

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report