Wall wrap / corner

[samanthaL98BX]

Im just beginning so hoping someone can help with how the different materials wrap around the corner.

Here is how it currently is showing:

Here is how I would like it to be:

 

[lucdoucet_msdl · Accepted solution]

@samanthaL98BX 

Here are the steps I would use:

1. Select wall 1 and disallow the automatic wall join at the end closest to wall 2;
2. Select wall 2 and join geometry to wall 1;
3. Use the trim tool to align the end of wall 1 with wall 2 if required.

Hope this helps,

-luc

[RDAOU · Accepted solution]

@samanthaL98BX 

See GIF below - Simply Disallow Join of the Exterior Wall return/Wrap and fillet the two interior ones