Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Wall reveal wrong orientation

1 ANTWORT 1
Antworten
Nachricht 1 von 2
octavio2
299 Aufrufe, 1 Antwort

Wall reveal wrong orientation

Added cast in place wall reveal on top of a parapet wall with several 90 degree turns using the instance sweep.  Some of the reveals have the wrong orientation, but after completing the addition and selecting them and they becoming selectable blue in color, all the reveals in a chain are selected I do not see any arrows or anything like a control handle to change the orientation of the reveals that have the wrong orientation.   

Question; Why I do not see any control handle to modify the orientation?  Or another way to ask the same question:  How to change the orientation of one of the reveals with the wrong orientation?

Thanks in advance.

1 ANTWORT 1
Nachricht 2 von 2
barthbradley
als Antwort auf: octavio2

Can you miter corner of walls hosting reveal?  

 

Do you have a blue dot at end? If so, can you pull it forward a tiny bit and then successfully activate Modify Returns?

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report