Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Wall opening extend to roof when height is above 1500 mm (in my case)

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
Anonymous
444 Aufrufe, 2 Antworten

Wall opening extend to roof when height is above 1500 mm (in my case)

Hi.

When I create a wall opening and set try to set the height to 2100 mm the opening extend to roof automatically although the height still says 2100 mm. I noticed that in my case this happens when I enter a height above 1500 mm. This only happens on the floor below the roof - no problem on other floors.
(see pictures before and after)

Please help.

/Anton

Beschriftungen (1)
2 ANTWORTEN 2
Nachricht 2 von 3
_Vijay
als Antwort auf: Anonymous

Its Join Geometry Issue may be...try delete and try to draw new wall …

Nachricht 3 von 3
_Vijay
als Antwort auf: Anonymous

Still issue is same try to share the sample model.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report