Hi everybody,
I have attached three pictures- one which is the image i get if i am on 3d mode and use a scope box to look directly from floor to ceiling in my building (colour), the second is what I have in my ceiling plan (black and white), and the third is the settings that I have selected in view range.
What is strange is that the width of the beam is not showing (as I have circled in blue).
For information the beam lies at 2750mm from the levels floor. I have tried this and many other offsets as the cut-plane- but for some reason the beam does not show correctly in the ceiling plan.
I wondered whether the view range is somehow reversed in ceiling plan. - but I dont really understand what I am doing incorrectly.
If someone can help me I will be very grateful, thanks in advance!
Structural Framing will only show a single line at Detail Level Coarse, medium or fine are required to see the full profile.
Steve Stafford
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.