Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Using Voids in a Furniture Family

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
d.webbYHD2X
262 Aufrufe, 2 Antworten

Using Voids in a Furniture Family

I am trying to make this banquette curvy, but the void is not cutting the extrusion.

Beschriftungen (4)
2 ANTWORTEN 2
Nachricht 2 von 3
Mike.FORM
als Antwort auf: d.webbYHD2X

Use the cut geometry tool in the modify tab. Then select the extrusion and then select the void.

MikeFORM_1-1715892276578.png

 

 

Nachricht 3 von 3
ToanDN
als Antwort auf: d.webbYHD2X

Extend the void boundary as shown below.

 

ToanDN_0-1715896092932.png

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report